Cleaning process of high pressure cleaning machine
1. After the high-pressure cleaning machine reaches the construction site, place the cleaning machine on the horizontal plane to avoid tilting, and check whether the screws of each part of the cleaning machine are loose.
2. Connect the power supply and water source to ensure sufficient water supply.
3. Connect the pipeline, high-pressure hose, high-pressure water gun, foot control valve and high-pressure nozzle. The water inlet pipe and high pressure hose shall not be folded or bent.
4. Observe whether the lubricating oil at the hydraulic end of the high-pressure pump is at 2 / 3 of the oil window. If the equipment is driven by diesel or gasoline, the oil tank should be filled with diesel or gasoline.
5. Press the green start button of the electric control box. After about 6-10 seconds, when the start button turns from yellow to green, it indicates that the person holding the high-pressure water gun should hold the switch of the high-pressure water gun to flush the impurities in the high-pressure pipeline out of the pipe. After the flushing, press the stop button to install the nozzle.
6. After the installation of the nozzle, start the equipment again, and observe the reading of the pressure gauge at the same time. The 0-extra pressure scale can be adjusted at will.
7. If the foot control valve is used, put the flexible gun into the pipe and step on the foot control valve after starting.
8. It should be noted that when using machines above gyb-3, the upper exhaust hole of the filter should be opened until the water flow is continuous and airless.
9. After the cleaning operation, press the red stop button of the electric control box or turn the drive key switch to the closed state to stop the machine.
10. When using the high-pressure cleaning machine, remember that the high-pressure water gun is good for people. During the cleaning process, pay attention to the changes of the noise, oscillation, oil temperature, water temperature and pressure of the pump.
Article from:Water sprayer http://www.efyx.com.cn
-
06-09
What should we pay attention to when using water sandblasting machine?
(1) Jiangmen water sandblasting machine is used to check the body of the high-altitude construction personnel. Only those who are healthy and have no acrophobia can work. When working at height, it is necessary to prevent throwing things, materials and other objects downward. In the process of o
-
06-09
Factors affecting the effect of high pressure water spraying machine
（1） The hydraulic parameters also have a great influence on the cleaning effect.（2） The selection of working parameters of high-pressure water jet produced by high-pressure cleaning machine directly affects the cleaning effect.（3） The material properties of the object to be cleaned
-
06-09
How to maintain the high pressure hose of high pressure water spraying machine?
In the high pressure water jet machine, in addition to the importance of cleaning the hydraulic support, the high-pressure hose used in the machine has attracted people's attention. If it is used and protected correctly, it can use relatively long time, then save money and reduce cost.Fo
-
06-09
How to maintain the water sandblasting machine?
As an important machine in industrial production, water sandblasting machine not only reduces the use of labor force and production cost, but also makes industrial production more convenient and fast. However, if it is in operation for a long time, it will shorten the service life, so it is very